RF RxT SW2.4-4W-VAL 24 VAC/DC

RF RxT SW2.4-4W-VAL 24 VAC/DC帶有繼電器輸出的無線接收器物料號: 1187208(舊物料號: 90590011)正品提供，歡迎詢價，上海銳譽快速報價steute世德


無線產品 > 產品展示 > 帶有繼電器輸出的無線接收器 > RF RxT SW2.4-4W > RF RxT SW2.4-4W-VAL 24 VAC/DC
RF RxT SW2.4-4W-VAL 24 VAC/DC
帶有繼電器輸出的無線接收器
物料號: 1187208(舊物料號: 90590011)
特征/選項

    sWave®無線技術
    4個無源繼電器輸出
    4個切換觸點，最大6 A
    LED燈用于指示和開關狀態
    SMA接插件連接器用于外接天線

產品圖片

 
規格
下載專區

? 數據表
PDF | 16.07.2018

? EC-Declaration of Conformity
PDF | 776 KB | 20.03.2017

? cCSAus-Certificate
PDF | 38 KB | 17.05.2017

? FCC-Certificate
PDF | 70 KB | 27.07.2017

? IC-Certificate
PDF | 43 KB | 27.07.2017

? Mounting and wiring instructions
PDF | 137 KB | 17.03.2017

? STEP-File
ZIP | 262 KB | 20.03.2017
技術參數
標準    EN 300 440-1 V1.3.1; EN 300 440-2 V1.1.2; EN 301 489-1 V1.6.1; EN 301 489-3 V1.4.1; EN 60950; EN 50371
安裝    DIN rail mounting
連接類型    terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm2 / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
防護等級    IP 20 符合 IEC/EN 60529
額定工作電流 Ie    max. 0.21 A
額定工作電壓 Ue    24 VDC -15 % … +10 %
輸入    2 transmitters per receiver
輸出    4 change-over contacts (relays)
K4 is used as validate relay
輸出觸點的額定工作電流/電壓    6 A/250 VAC; 2 A/24 VDC
應用類別    AC-15; DC-13
頻率    2.4 … 2.4835 GHz
輸出電源    - 6 dBm e.i.r.p (0 dBm at 50 Ohm)
輸入靈敏度    up to -98 dBm (-104 dBm at 50 Ohm)
顯示    green LED: operating state,
orange LED: switching conditions
EMC參數    according to EMC Directive
防污等級    2 to IEC/EN 60664-1
環境溫度    0 °C … +55 °C
貯藏和運輸溫度    –25 °C … +85 °C
注釋    Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
產品認證    USA: FCC: XK5-SW100AMBINT;
Canada: IC: 5158A-SW100AMBINT
Gewicht    180 g
Arrangement of receiver and switch antenna

Optimum    Possible       Unsuitable

mounting    mounting     mounting


Note

Magnetic base antennae must be mounted on a
metal plate of min. 250 x 250 mm size.